Garage epoxy floors, polyaspartic systems and concrete coatings for homes in Sacramento and Northern California. Every system starts with proper surface preparation, because that is what makes a coating last.
CSLB #1122392
Grinding, repair and testing before coating
Epoxy, polyaspartic and resinous coatings
Sacramento and the surrounding region
Finish options vary by system and manufacturer. These examples show the general styles we offer, and we review actual samples with you before work begins.
A multi-tone flake finish that adds texture and helps hide dust and tire marks.
Earth-tone flakes that complement warm exterior and interior palettes.
A clean, uniform finish for a modern, minimal garage or workspace.
Slip-resistant textured coating for patios, walkways and entries.
From garage floors to patios, we install coating systems that protect your concrete and are easy to live with.
Seamless, cleanable garage floors with flake or solid color finishes. Epoxy and polyaspartic systems with decorative flake or solid color finishes, installed over a diamond-ground slab.
Fast-curing, UV-stable coatings for a quicker return to use.
Color flake blends that add texture and hide everyday wear.
Slip-resistant exterior coatings for patios, walkways and entries.
Crack, spall and surface repairs that restore damaged concrete.
Diamond grinding and repair so coatings bond properly.
We install only the coating systems we are qualified to apply, following each manufacturer’s requirements. We do not offer house painting or cabinet refinishing.
Select a system to see how it is typically assembled, and hover a layer to see what it does.
Simplified, typical build-ups for illustration. Final systems depend on testing, substrate conditions and manufacturer requirements.
Many of the best garage floors combine both: an epoxy base for build and bonding, finished with a UV-stable polyaspartic topcoat.
| Compare | SystemEpoxy | SystemPolyaspartic |
|---|---|---|
| Best for | Base coats and high-build garage floors | Topcoats and full systems where fast return to use matters |
| Cure time | Longer cure before full use | Faster cure; often walkable sooner |
| Sunlight | Can amber without a UV-stable topcoat | UV-stable; resists yellowing |
| Common pairing | Epoxy base with a polyaspartic topcoat | Full polyaspartic or polyaspartic over epoxy |
General characteristics only. System selection depends on slab condition, moisture, exposure and the manufacturer’s requirements.
A coating is only as good as the surface under it, so preparation is built into every step.
Concrete condition, moisture and existing coatings evaluated.
A written scope with the recommended system and finish.
Diamond grinding plus crack, joint and spall repairs.
Coating system installed to the manufacturer’s requirements.
Cure-time guidance and simple care instructions.
Epoxy builds thickness and bonds strongly to concrete. Polyaspartic cures faster and is UV-stable, so it resists yellowing in sunlight. Many garage systems use an epoxy or polyaspartic base with a polyaspartic topcoat.
It depends on the system, temperature and humidity. Polyaspartic systems often allow foot traffic sooner than traditional epoxy. We provide cure times for your specific system before work begins.
Coatings need a clean, profiled surface to bond to. We diamond grind the concrete and repair cracks and spalls, which helps prevent peeling and delamination.
In many cases, yes. Cracks, joints and spalls are repaired before coating. Some movement cracks can reappear through any coating, and we will explain that during the assessment.
No. Our residential coatings work focuses on garage floors, concrete coatings, patios, walkways and concrete restoration.
Summit Building Group serves Sacramento and the greater Northern California region.
Tell us about your garage, patio or walkway. We’ll assess the concrete and recommend a system and finish.
Request a coatings estimate for your garage, patio or walkway and get a clear recommendation for your concrete.