Building Diagnostics

Roof & Building Envelope Condition Assessments

Understanding How Buildings Perform. Identifying Conditions Before They Become Bigger Problems.

Summit Building Group provides comprehensive visual and technical assessments of commercial roofing systems and exterior building-envelope components.

From roofing membranes and drainage systems to exterior walls, windows, doors, flashing, sealants, waterproofing transitions, and building penetrations, we examine observable conditions that may affect a building's weather resistance and long-term performance.

Our approach combines construction expertise, advanced inspection technology, systematic field assessment, and professional documentation to help property owners make informed decisions about maintenance, repairs, and capital improvements.

  • HCI-CHaag Certified Inspector, Commercial Roofs
  • CSLB #1122392Licensed General Contractor
  • IndependentDocumented, prioritized findings
Roof PlanSheet A-1
South ElevationSheet A-2
Roof and walls assessed as one connected system.
Two Disciplines. One Building.

The roof and the walls get equal attention.

Water does not stop at the roof edge. Most building-performance problems develop where systems meet, so every assessment looks at the roofing system and the exterior envelope with the same level of detail.

01
Commercial Roof Assessments

Roofing systems, from membrane to drain.

We document the observable condition of the roof assembly, how it drains, and how it has been modified, penetrated or repaired over time.

  • Roof system condition
  • Membranes and seams
  • Flashings and terminations
  • Parapets and roof edges
  • Drainage and ponding conditions
  • Penetrations and rooftop equipment
  • Roof modifications and post-installation assessments
  • Visible deterioration and moisture-related concerns
02
Exterior Building Envelope Assessments

Walls, openings and the transitions between them.

We evaluate cladding, openings, sealants and waterproofing details that keep water out of the building below the roof line.

  • Exterior wall assemblies
  • Stucco, masonry, metal panels, and other cladding systems
  • Window and exterior door interfaces
  • Flashing and waterproofing transitions
  • Exterior sealants and control joints
  • Wall penetrations and attachments
  • Roof-to-wall connections
  • Balcony, deck, and applicable waterproofing interfaces
  • Drainage and water-management details
  • Observable signs of water intrusion or deterioration
Where they meetParapets and copingRoof-to-wall flashingScuppers and through-wall drainagePenetrations at walls and roofsDeck and threshold transitions
Explore the Building

A building is an interconnected system.

Select part of the building to see what we assess there and how it connects to everything around it.

Roof PlanAerial view
Comparative moisture readings
South ElevationExterior view
Thermal frame Verify if authorized
Whole Building

The building as one system

A roof, its walls and its openings work together to manage water. A small opening at one transition can show up as damage somewhere else entirely, which is why we assess the envelope as a connected system rather than as separate parts.

  1. 1Roof-to-wall connection links the roof membrane to the tower cladding.
  2. 2The scupper carries roof water through the parapet to the downspout.
  3. 3The balcony deck ties into the wall, the door threshold and the slab edge.
  4. 4Window heads depend on flashing above them to shed water.

Select a system to see what we assess.

Roof

Commercial roof assessment

We review the roofing system for condition, drainage and detailing, including the areas where equipment, penetrations and modifications have changed the original roof.

  1. 1Rooftop equipment curbs and penetrations
  2. 2Membrane field, laps and seams
  3. 3Drains, crickets and ponding conditions
  4. 4Parapets, coping and roof edges
  5. 5Flashings and terminations at walls
  6. 6Roof modifications such as new conduit runs

Connects to: exterior walls at parapets and roof-to-wall flashing.

Exterior Walls

Exterior wall and cladding assessment

We examine cladding systems, joints and attachments for cracking, deterioration, failed sealants and water-management details that may allow water behind the wall surface.

  1. 1Stucco cladding and crack patterns
  2. 2Control joints and reveals
  3. 3Masonry base and fascia
  4. 4Metal panel joints and seams
  5. 5Wall penetrations and attachments
  6. 6Downspout discharge and drainage at grade

Connects to: windows, roof-to-wall transitions and grade drainage.

Windows & Doors

Window and door interface assessment

Openings are one of the most common sources of water intrusion. We look at perimeter sealants, flashing, sills and the interfaces between each opening and the surrounding wall.

  1. 1Window head flashing and perimeter sealant
  2. 2Sills and sill transitions
  3. 3Storefront glazing system
  4. 4Entry door threshold
  5. 5Balcony door interface
  6. 6Tower glazing interface with metal panels

Connects to: wall cladding, sealant joints and waterproofing transitions.

Waterproofing

Waterproofing transition assessment

Transitions are where one material or system hands water off to the next. We document roof-to-wall connections, exposed decks, coping, scuppers and other waterproofing assemblies that apply to the building.

  1. 1Roof-to-wall connection and counterflashing
  2. 2Exposed balcony deck, slab edge and threshold
  3. 3Parapet coping and cap flashing
  4. 4Scupper and through-wall transition
  5. 5Base of wall and grade transition

Connects to: roof drainage, wall cladding and openings.

Building Diagnostics

How diagnostics support the assessment

Diagnostic methods help us look beyond what is visible from the ground. Their results are investigative indicators that guide where to look more closely. They are not, by themselves, confirmation of concealed damage.

  1. 1Aerial imaging documents roof layout and visible conditions
  2. 2Infrared thermography may show a temperature pattern worth evaluating
  3. 3Moisture screening compares readings against the roof baseline
  4. 4Targeted verification, where appropriate and authorized
  5. 5Photographic mapping ties each finding to a location

Thermal patterns and moisture readings are indicators, not confirmation.

Request a Building Envelope Assessment

Illustrative building. Assessment scope, access and methods vary by property, system type and agreed scope of work.

Assessment Applications

Five reasons owners call us.

Each assessment starts with the same thing: an accurate, documented picture of the roof and the building envelope at the time of the visit.

01Buyers · investors · lenders · asset managers

Commercial Property Acquisition & Due Diligence

Assess observable roof and exterior-envelope conditions before purchasing a building.

  • Roof and envelope condition summary
  • Visible deficiencies and maintenance needs
  • Anticipated repair and capital considerations
  • Estimated remaining roof service life, where appropriate
Property due diligence
02Owners · developers · general contractors · property managers

Post-Construction & Post-Installation Assessments

Document observable conditions after roofing, exterior cladding, window, sealant, or other building-envelope work.

  • Independent review of completed work
  • Workmanship and detailing concerns
  • Deficiencies and corrective-action items
  • Reinspection of corrected items
Request this assessment
03Owners · solar, HVAC, glazing and signage contractors

Building Envelope Modification Assessments

Evaluate affected areas before and after work involving exterior penetrations, equipment, windows, doors, signage, and other modifications.

  • Pre-work record of existing conditions
  • Solar, HVAC and rooftop equipment work
  • New wall and roof penetrations, signage and attachments
  • Post-work evaluation of affected areas
Request this assessment
04Owners · property, asset and facility managers

Existing Building Condition Assessments

Document deterioration, visible defects, maintenance needs, and conditions warranting further investigation.

  • Baseline condition of roof and envelope
  • Prioritized repair and maintenance needs
  • Support for budgeting and capital planning
  • Foundation for Roof Asset Management
Roof Asset Management
05Owners · tenants · property managers

Water Intrusion & Building Performance Concerns

Evaluate observable conditions and identify where more detailed investigation may be appropriate.

  • Visible sources and pathways of water entry
  • Conditions at transitions and openings
  • Areas that warrant further investigation
  • Clear next steps when deeper diagnosis is needed
Forensic Water Intrusion Investigations
Correct. Reinspect. Document.

For construction and modification work, we document conditions before and after, record deficiencies for correction, and reinspect once corrective work is complete.

  1. Pre-work inspection
  2. Construction or installation
  3. Post-work inspection
  4. Identify deficiencies
  5. Corrective work
  6. Reinspection
  7. Final condition report
Assessment Methods

Technology that tells us where to look.

Our Building Diagnostics approach combines several methods. Each one adds information, and each one has limits. We describe what we observed and how confident the finding is, so recommendations stay grounded.

01

Aerial and high-resolution visual imaging

Documents roof layout, rooftop equipment, drainage paths, parapets and upper wall conditions that are difficult to see from the ground.

Shows surface conditions only.

02

Infrared thermography

Used where weather and building conditions are suitable to identify surface temperature patterns that may warrant closer evaluation.

An infrared anomaly is an indicator. Equipment, materials, sun exposure and construction details can create similar patterns.

03

Non-invasive moisture screening

Comparative readings help map where moisture levels differ from the surrounding baseline, without cutting into the assembly.

Readings are comparative and do not, by themselves, confirm concealed water damage.

04

Detailed visual and physical assessment

Hands-on review of membranes, flashings, sealants, joints, cladding and openings that are safely accessible.

Limited to accessible and observable areas.

05

Targeted testing and invasive verification

When appropriate, authorized and within the agreed scope, limited testing or openings help confirm what screening suggests.

Performed only with owner authorization.

06

Photographic mapping and technical documentation

Each observation is tied to a location on the roof plan or elevation, with photographs, descriptions and priority levels.

Reflects conditions at the time of the assessment.

An important distinction

Infrared anomalies and comparative moisture readings are investigative indicators, not automatic confirmation of concealed water damage. When a finding matters to a decision, we recommend verification that is appropriate, authorized and within the agreed scope.

Sample Report

What a building envelope assessment report looks like.

You are not just buying a site visit. Every assessment produces a report that ties each finding to a location, explains what was observed, and ranks what to do first. Select an observation to see how it is documented.

Building Envelope Assessment Report · Illustrative ExampleThree-story commercial office building
Assessment
Existing building condition, roof and envelope
Systems
Single-ply roof, stucco, masonry, metal panels, storefront, exposed deck
Methods
Visual, aerial imaging, infrared where suitable, moisture screening
Roof inspector
HCI-C
10Observations
4Priority 1
4Priority 2
2Priority 3
2Further investigation
P1Address promptlyP2Near-term repairP3Monitor or maintainFurther investigation
Every report includes
  • Building elevations and roof plans
  • Location-based photographic observations
  • Exterior wall and roof conditions
  • Window and door interfaces
  • Flashing and waterproofing observations
  • Identified deficiencies
  • Prioritized recommendations
  • Areas requiring additional investigation
Photo
P1

Location
Observed condition
Recommendation

Further investigation recommended

  1. 1Roof · DrainagePonding and debris at roof drainP2
  2. 2Roof · Membranes & seamsOpen lap seam at equipment curbP1
  3. 3Roof · PenetrationsUnflashed conduit support penetrationsP1
  4. 4Waterproofing · ParapetOpen coping jointsP2
  5. 5Waterproofing · Roof-to-wallSeparated counterflashing at roof-to-wall connectionP1
  6. 6Exterior walls · CladdingStucco cracking at window cornerP3
  7. 7Windows · SealantsDeteriorated window perimeter sealantP2
  8. 8Waterproofing · BalconyDeck membrane termination at door thresholdP1
  9. 9Exterior walls · PenetrationsUnsealed wall penetrationP2
  10. 10Exterior walls · DrainageEfflorescence at downspout dischargeP3

P1Address promptly

  • 2Open lap seam at equipment curb
  • 3Unflashed conduit support penetrations
  • 5Separated counterflashing at roof-to-wall connection
  • 8Deck membrane termination at door threshold

P2Near-term repair

  • 1Ponding and debris at roof drain
  • 4Open coping joints
  • 7Deteriorated window perimeter sealant
  • 9Unsealed wall penetration

P3Monitor or maintain

  • 6Stucco cracking at window corner
  • 10Efflorescence at downspout discharge

Areas requiring additional investigation

  • 5Separated counterflashing at roof-to-wall connection
  • 8Deck membrane termination at door threshold

Investigation is recommended where screening or visible conditions suggest a concern that cannot be confirmed by observation alone.

Illustrative example only. Actual reports vary by property, systems, access and scope. Observations reflect conditions at the time of the assessment and are not engineering certifications, warranties or guarantees of future performance.

Budget with confidence

Priorities separate what needs attention now from what can be planned.

Scope repairs accurately

Contractors bid against documented, located conditions.

Negotiate an acquisition

Buyers see roof and envelope conditions before closing.

Plan long-term care

The report becomes the baseline for ongoing management.

Who Performs the Work

Specialized training. Construction experience.

Commercial roof assessments are performed by a Haag Certified Inspector, Commercial Roofs (HCI-C). Building envelope assessments draw on Summit Building Group's construction, roofing and waterproofing experience, so findings come with practical, buildable recommendations.

We work withBuilding ownersInvestors and lendersAsset and property managersFacility managersGeneral contractorsDevelopersRoofing, glazing and cladding contractorsSolar, HVAC and mechanical contractors

For other contractors, Summit is a technical resource, not a competitor. Our role is an independent, documented view of the building so every party works from the same information.

Independence disclosure: Our assessments are fee-based and separate from any repair proposal. If Summit has performed or proposed work on the property, we tell you in writing before the assessment begins.

What our assessments provide

  • Independent observations of roof and envelope conditions at the time of the visit
  • Roof plans, elevations and location-based photographs
  • Identified deficiencies with priority levels
  • Recommendations, further-investigation guidance and reinspection

What they are not

  • Engineering certifications
  • Warranties or manufacturer warranty certifications
  • Guarantees of future performance
  • Insurance coverage determinations

Where engineering or other specialized professional services are required, appropriately licensed professionals should be engaged.

Common Questions

Roof and envelope assessment questions, answered.

Serving building owners, investors and contractors in Sacramento and Northern California.

Call Summit · (916) 599-0728
What is a roof and building envelope assessment?

It is an independent visual and technical evaluation of a commercial roof and the exterior components that keep water out of a building, including walls, cladding, windows, doors, flashing, sealants and waterproofing transitions. Summit documents observable conditions, identifies deficiencies and provides prioritized recommendations in a written report.

Which parts of the building envelope do you assess?

Depending on the building and scope, we assess roofing systems, parapets and roof edges, exterior wall assemblies and cladding such as stucco, masonry and metal panels, window and door interfaces, sealants and control joints, wall penetrations, roof-to-wall connections, balconies and decks, and drainage details.

Can you assess work another contractor completed?

Yes. We provide independent post-construction and post-installation assessments for roofing, exterior cladding, windows, sealants and other envelope work, document observed deficiencies and reinspect corrected items.

Do you assess before and after solar, HVAC or other modifications?

Yes. We document affected roof and wall areas before work begins, evaluate them after the work is complete, and reinspect corrective work. This applies to solar, HVAC, signage, new openings and other penetrations.

Does infrared or moisture screening confirm hidden water damage?

No. Infrared anomalies and comparative moisture readings are investigative indicators. They help identify where to look more closely. When confirmation matters, we recommend targeted verification that is appropriate, authorized and within the agreed scope.

When do you recommend a forensic water intrusion investigation?

When there are recurring leaks, interior water damage with no obvious source, or repairs that have not solved the problem, we recommend a separately scoped, fee-based Forensic Water Intrusion Investigation.

Is the assessment an engineering report or a warranty?

No. Our assessments are not engineering certifications, warranties, guarantees of future performance or insurance coverage determinations. Where engineering services are required, appropriately licensed professionals should be engaged.

Where do you provide assessments?

Summit Building Group provides roof and building envelope assessments for commercial properties in Sacramento and throughout Northern California.

Next Step

Get an independent view of the whole building.

Buying a property, accepting completed work, planning a modification, or chasing a water problem? Tell us what is happening and we will recommend an assessment scope before any work begins.