Proactive Commercial Roof Care

Summit Building Group provides a proactive commercial roof management program designed to maintain proper drainage, identify potential hidden issues early, and document roofing conditions over time. This approach helps property owners plan timely maintenance and repairs, address developing concerns, and reduce the risk of unexpected damage and costly capital expenditures.

Why Maintenance Pays

Proactive Roof Management Is an Investment, Not an Expense

A commercial roof is one of the largest capital assets on a property. Summit helps owners make strategic roof decisions through scheduled assessments, documentation, diagnostic technology and prioritized maintenance recommendations.

Protect a major capital investment

Manage the roof as an asset with a documented condition, not an unknown liability.

Identify issues earlier

Scheduled assessments catch open seams, failed flashings and blocked drains while repairs are still small.

Reduce avoidable damage

Correcting small defects early lowers the risk of water reaching insulation, decking and interiors.

Improve budgeting and planning

Documented conditions turn surprise repairs into planned, prioritized line items.

Make informed repair-or-replace decisions

Condition data shows when targeted repairs make sense and when replacement is the better investment.

Extend serviceable life where appropriate

Consistent maintenance can help a roof reach its expected service life, and in some cases extend it.

Reduce disruptions and emergencies

Fewer unplanned leaks means fewer emergency calls, tenant complaints and operational interruptions.

Start with a baseline.

A baseline assessment documents current conditions and sets priorities for the years ahead.

Request an Assessment →

Roof Asset Management

What would a roof program need to deliver to pay for itself?

Every roof gets replaced eventually. The question is when, and whether you plan for it or react to it. Enter your roof's numbers to see what a management program costs as a share of replacement value, and how many extra years of service it would need to pay for itself.

Your roof

Installed California averages including tear-off (Roof Observations, 2026). Your actual cost depends on condition and scope.
sq ft
$/ sq ft
years
Industry field studies: about 17 years.
$/ yr
Roof consultants estimate maintenance adds 1 to 5 years; one manufacturer-reported portfolio showed 8.
% / yr
% / yr

Break-even years the program must add

—

Replacement cost

—

Program as share of replacement

—

Five-year program cost

—

Value of deferring replacement compared with program cost, in today's dollars
Value of deferring replacement 3 years—
Program cost over the same years—
Net, in today's dollars—

Illustrative estimate only. Results depend on your roof's condition and the assumptions you enter. A maintenance program can't guarantee a longer roof life or prevent replacement. Deferring replacement isn't the same as eliminating its cost. Sources and dates are listed under “Assumptions and sources”.

Request a Roof Assessment
Assumptions and sources
  • Replacement cost presets: California installed averages including $1.50/sq ft tear-off; R-30 rows assume R-30 continuous insulation. Roof Observations, California Roof Cost Guide (2026 update).
  • 17-year roof life: Roofing Industry Alliance for Progress (2003), average low-slope roof life, reported in Roofing Contractor (2009); Schneider & Keenan (1997), 25,000+ roofs averaging 16.8–18.4 years for most systems, reported in Plant Services (2003).
  • Years added by maintenance: Consultant estimate of 1–5 years, RCI Interface (Sept 1997). 21 vs. 13 years and $0.14 vs. $0.25 per sq ft from 15-year Firestone/ProLogis data, reported by a Firestone employee in Roofing Contractor (2009).
  • 1.6% guideline: Canadian Roofing Contractors Association technical director, quoted in FMLink (2012).
  • 4% escalation: ENR Building Cost Index up 4.5% year over year, July 2026 (ENR); JLL North America forecast 3.2–4.2% for 2027 (JLL, Oct 2026).
  • 6.75% cost of capital: WSJ prime rate as of mid-2026 (Bankrate), used as a conservative floor.
  • How it's calculated: Break-even compares the roof's annual cost without a program (replacement cost ÷ life) with its annual cost when the program adds years (replacement cost ÷ extended life, plus program cost). Deferral value is the replacement cost minus its present value when pushed out the chosen number of years, with cost escalation and your cost of capital.
The Technology

See What the Roof Is Hiding

Drone imaging, infrared thermography, non-invasive moisture screening and targeted verification help us evaluate roof conditions beyond a conventional visual inspection.

Suspect ASuspect BSuspect CC: readings at baseline1A: targeted test confirms wet insulation2B: field inspection finds an open seam3C: no moisture found, heat from equipment
Cooler to warmer surface temperature
BaselineElevatedHigh
Next

Illustration of a layered assessment process. Findings, methods and the need for verification vary by roof system and condition.

Document conditions

A consistent visual and photographic record at every scheduled visit.

Identify suspect areas

Thermal and moisture screening show where to look more closely.

Verify before recommending

Suspect areas are confirmed in the field before repairs are scoped.

Support better decisions

Clear findings help you prioritize repairs, plan budgets and time replacement.

Our Framework

The SUMMIT Method

A named, proprietary framework for smarter roof asset management.

Every Summit roof program follows the same six-part system. Each letter is a defined stage, and together they turn one inspection into a documented, long-term plan for the roof.

The cycle repeats. Each year, Track feeds the next Survey, so the roof record keeps getting stronger.
  1. SurveyStep 01

    Gather roof/building history, warranties, prior repairs, drawings, and existing conditions.

    Baseline record
  2. UnderstandStep 02

    Assess and understand the roof's current condition, vulnerabilities, and performance.

    Condition assessment
  3. MapStep 03

    Map moisture, drainage, defects, penetrations, and problem areas.

    Roof condition map
  4. MeasureStep 04

    Measure condition, risk, remaining service life, priorities, and projected capital needs.

    Priority & capital plan
  5. ImplementStep 05

    Implement the appropriate strategy: preventive maintenance, repairs, restoration, coatings, or replacement.

    Strategy in action
  6. TrackStep 06

    Track the asset over time through annual inspections, documentation, maintenance history, reporting, and lifecycle/capital planning.

    Lifecycle record

MORE THAN A ROOF INSPECTION

Summit’s program combines scheduled maintenance with the scanning technology and disciplined documentation,

EVERY SCHEDULED VISIT

• Remove leaves, trash and loose debris
• Clean scuppers, drains, strainers and drainage
paths
• Inspect gutters, downspouts and overflow routes
• Check ponding and drainage performance
• Inspect seams, flashings, penetrations and curbs
• Review parapets, coping, hatches and skylights
• Check rooftop equipment areas and contractor
damage
• Photograph and map deficiencies

TECHNOLOGY-ENABLED DIAGNOSTICS

Non-destructive moisture screening, no core cuts, no membrane damage
• Broad-area flat-roof moisture surveying with color-coded mapping
• Point investigation of roof and wall assemblies
• Concrete and wood deck moisture verification where appropriate
• Relative humidity, dew point and surface-temperature analysis to distinguish leaks from condensation
• Digital condition history with year-over-year trend
comparison

The Summit Service Cycle

The goal is simple: give owners better information, cleaner drainage systems, earlier warning of developing conditions, and a documented plan for the roof as a capital asset, not a surprise expense.

Baseline Assessment

Clean & Clear Drainage

Inspect

Scan

Maintain

Report

Track

Repair When Needed

, The Roof Asset Lifecycle

From due diligence to the next roof.

Roof Asset Management starts before you own the building and continues for the life of the roof, and the one after it.

01 · AcquisitionCommercial Roof Due Diligence Assessment
02 · BaselineEstablish existing roof condition
03 · OwnershipEnroll the property in Roof Asset Management
04 · MonitorScheduled inspections, preventive maintenance, documentation
05 · PlanRepair, restoration and capital planning
06 · ExtendMaximize practical roof service life
07 · ReplacePlan replacement before it becomes an emergency
08 · RepeatThe new roof becomes the next asset being managed
Inspect → Document → Maintain → Plan → Restore → Replace. The right decision depends on the roof's actual condition.

Why Owners Choose Summit Over an Inspection-Only Vendor

• Direct measurement, not inference. We measure moisture inside the assembly and verify anomalies on the spot.
• One accountable partner. Inspection companies hand you a report and leave. Summit is a licensed general contractor: we inspect, maintain, diagnose, repair, and support replacement planning under one roof.
• Evidence-grade documentation. Mapped findings, photos, and trend records support warranty claims, insurance events, budgeting, and property transactions.

THREE LEVELS OF PROTECTION

ESSENTIAL ROOF CARE From $1,500 / year, 2 scheduled visits

Cleaning of roof surface debris; scuppers, drains and accessible drainage paths; visual condition inspection; photo report; priority recommendations. Best for smaller, lower-complexity commercial roofs.

Everything in Essential, plus targeted moisture screening at suspect areas, condition tracking, limited minor-maintenance labor allowance, and preferred scheduling.

Everything in Preventive + Scan, plus a baseline broad-area moisture survey with the color-coded map where the roof assembly is compatible, annual trend comparison, repair prioritization and 1–5 year capital planning. Best for larger facilities and portfolio owners.

Suggested Size Adjustments

Roof AreaEssential PreventivePreventive + ScanAsset Management
Up to 10,000 SF$1,500–$2,400/year$2,500–$4,000/year$4,500–$7,000/year
10,001–25,000 SF$2,400–$4,000/year$4,000–$6,500/year$7,000–$11,000/year
25,001–50,000 SF$4,000–$6,500/year$6,500–$10,000/year$11,000–$17,500/year
50,000+ SFCustom PricingCustom PricingCustom / Portfolio Pricing

ADD-ON SERVICES

ServiceSuggested Starting Price
Standalone Leak Investigation / Diagnostic Mobilization$950 minimum
Comprehensive Moisture Survey with Mapped Report$1,750 minimum + size/complexity
Pre-Purchase Roof Due Diligence$2,500 minimum
Post-Storm Condition Assessment$1,250 minimum
Post-Contractor Rooftop Damage Inspection$750 minimum
Additional Drain/Scupper Heavy CleaningQuoted based on condition and labor
Minor Repairs Beyond Plan AllowanceQuoted or Time & Materials
Emergency / Priority ResponseProgram-member preferred rates

 

WHAT THE CUSTOMER RECEIVES

A digital roof asset file including: roof plan, roof type and age, drain and scupper locations, equipment and penetration locations, photographs, observed deficiencies, moisture survey maps and screening records, completed maintenance, repair history, priority recommendations and future capital considerations. Every year of membership makes the record, and the roof decisions it supports, more valuable.

WHY THIS PROGRAM CREATES VALUE

• Recurring care: scheduled visits create predictable protection instead of emergency-only interaction.
• Better decisions: diagnostic information helps owners prioritize where to investigate and spend.
• Documentation: year-over-year records protect warranties, support insurance events, and strengthen property value
at sale or refinance.
• One accountable partner: Summit can inspect, maintain, diagnose, repair and support future replacement planning.

Important Service Notes

Moisture screening is comparative and non-destructive; readings can be affected by roof composition and conductive materials. Findings are reported as areas of elevated or anomalous readings that may warrant further investigation, not as definitive proof of trapped water. Destructive verification, engineering, laboratory analysis, warranty determinations and code-required professional services are outside the base program unless separately contracted.

Building Diagnostics

Recurring Water Intrusion? The Source May Not Be Where the Damage Appears.

When condition surveys reveal recurring leaks or suspected wet insulation, our Building Diagnostics division follows up with drone, infrared and moisture verification to document what is happening.

Diagnostic investigations are separately scoped, fee-based professional services.

We Build Trust

PROTECT THE ROOF. PROTECT THE ASSET.

Schedule a baseline assessment and build a maintenance plan around the actual condition of your property.